Human β Amyloid (1-42) ELISA Kit Wako, High Sensitive

for Immunochemistry

These ELISA kits detecting beta amyloid (1-42) and (x-42)* that ensure highly sensitive detection. These beta amyloids are indicated to have a correlation with Alzheimer's disease. Detection sensitivity of the kits is about 10 times higher than that of the existing productsand the dynamic range is from 0.1 to 20 pmol/L. Fab' fragment of the labeled antibody is used as well as so that the nonspecific binding is reduced.
*: beta Amyloid (x-42) is beta Amyloid peptide modified or cleaved at the N-terminal.

Highly Sensitive beta Amyloid (1-42) and (x-42) Detection Kits

• Human beta Amyloid (1-42) ELISA Kit Wako, High Sensitive (Wako Catalog #296-64401; 96 tests)
• Human/Rat beta Amyloid (42) ELISA Kit Wako, High Sensitive (Wako Catalog #292-64501; 96 tests)

This product is for research use only. Do not administer it to human.

For 96 Tests

This ELISA kit enables highly sensitive quantification of β amyloid (1-42), which has been associated with Alzheimer’s disease.

The detection sensitivity of the kit is about 10 times higher than that of the conventional kit, with the standard curve range of 0.1-20.0 pmol/L. As with the conventional kit, non-specific binding is minimized by using Fab’ monoclonal antibody.

• Enables quantification of Aβ (1-42) with high sensitivity (standard curve range: 0.1-20.0 pmol/L).
• Has a low level of non-specific binding since Fab’ fragment of the antibody (BC05) is used to recognize the C-terminal.
• Consists of a highly specific monoclonal antibody developed by Takeda Pharmaceutical Company Ltd..

1. Highly Sensitive Detection of beta Amyloid (1-42) and beta Amyloid (x-42): Dynamic Range: 0.1 ~ 20.0 pmol/L

2. Specific detection of the C-terminal portion of beta Amyloid 42 by using monoclonal antibody BC05 (Fab' fragment)

3. Highly specific monoclonal antibodies were provided by Takeda Pharmaceutical Company Ltd.

Made by FUJIFILM Wako Pure Chemical Corporation and distributed by FUJIFILM Irvine Scientific 

• For research use or further manufacturing use only. Not for use in diagnostic procedures. 
• Product content may differ from the actual image due to minor specification changes etc. 
• If the revision of product standards and packaging standards has been made, there is a case where the actual product specifications and images are different.